mdexlumspotk2_a dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com lumispot k2 led light engines led color (bbbb) operating conditions applications mechanical dimensions recommended pcb temp=55oc (131of) maximum pcb temp =80oc (176of) led life @ 55oc pcb temp = 50,000 hours for maximum performance, all lumispot k2 led light engines should be screwed or affixed using thermal adhesive to an appropriate heat sink thermal conductivity = 1.3w/m-k breakdown voltage = 2kv recommended accessories include colordriver xp (cdu-xp-dmx-con-ip) & sub-lenses k2 leds 3 degree spot lenses 1.6mm aluminum clad pcb substrate 3m (9.8) lead cable included height (all models including lens) = 15.5mm (0.61) lsp32 = 180mm x 180mm (7.09 x 7.09) lsp12 = 127mm x 100mm (5.00 x 3.94 color washing architectural lighting spotlights floodlights accent lighting night clubs, restaurants, bars materials/finish ordering information 12 = lumispot k2 12 leds 32 = lumispot k2 32 leds # of leds (aa) rgbw = red, green, blue & white rgba = red, green, blue & amber wwww = 4x cool white features / benefits lumispot k2 light engines come fitted with opt-k2 optics specifically designed for k2 leds 70% lumen maintenance at 50,000 hours at 55oc pcb temperature red, blue and green leds allow for infinite number of color combinations and dynamic color changing emits no uv or ir radiation thermally protected to avoid damaging over- temperature operation available color kinetics pass through license, consult factory for details optics sub-lenses (purchased separately) opaa-1-df 6o diffused sub-lens opaa-1-wsl 12o wide sub-lens opaa-1-osl 4o x 27o oval sub-lens all angles are half divergence
dialight corporation 1501 route 34 south ? farmingdale, nj 07727 usa tel: (1) 732-919-3119 ? fax: (1) 732-751-5778 ? www.dialight.com led light engines wiring information typical led photometric data dialight reserves the right to make changes at any time in order to supply the best product possible. led color wavelenth / cct luminous flux or radiometric power (lm or mw) min max lumispot 12 (flux per 3 of each color) lumispot 32 (flux per 8 of each color) 350ma 700ma 1000ma 350ma 700ma 1000ma red 620nm 645nm 108lm 180lm -------- 288lm 480lm -------- green 520nm 550nm 108lm 180lm 240 lm 288lm 480lm 640 lm royal blue 440nm 460nm 528mw 882mw 1140mw 1408mw 2352mw 3040mw white 4500ok 10000ok 108lm 180lm 240lm 288lm 480lm 640lm amber 584nm 597nm 108lm 180lm -------- 288lm 480lm -------- results are led manufacturers test data @ 25oc jtc. light output at 55oc pcb temperature will be approximately 10-15% lower. elevated temperatures will result in further degradation of light output. for maximum performance use appropriate heat sinking . mdexlumspotk2_a lumispot k2 1. when used with dialight-lumidrives colordriver xp, over-temperature operation is prevented with the on-board thermistor feedback to the driver. 2. oems who wish to use their own driver solution should consult the datasheet for the luxeon k2 emitters together with the thermal design guide. 3. the lumispot k2 light engines require secondary heatsinking. 4. the red & amber channels should not be driven at more than 700ma. application notes dialight lumidrives york house ? weatherby road ? long marston, york, yo26 7nh tel: 0845 6346161 ? fax: 0845 6346160 ? www.dialight.com
|
